Drawing, not a photograph. This pack has not been photographed yet; the stock codes and pack sizes below are the specification.
Supplied as 120 ml.
Stock code CC3-CRE.08M
- Made and batch-released in Vadodara
- ISO 13485:2016 quality system
- Datasheet published: see every stock code below
Product details.
Creatinine (End Point) is a reagent kit for the quantitative estimation of creatinine in serum by the Jaffe method, with no deproteinisation. The colour from alkaline picrate is read before and after an acid reagent, which separates creatinine from reactive non-creatinine substances; the difference at 510 nm is proportional to creatinine. Manufactured at Reckon’s Vadodara facility under ISO 13485:2016 quality management, and released against reference standards before dispatch.
The specifications and steps on this page are from the datasheet, last updated 04-2023. The datasheet governs: read it before use, or ask us.
- Method
- Jaffe, two-step end point
- Sample
- Serum
- Sample volume
- 200 µl (0.20 ml)
- Wavelength
- 510 nm (500 to 530 nm, or a green filter)
- Linearity
- Up to 12 mg/dl
- Storage
- Reagents at room temperature
Full specification17 items
- Category
- Clinical chemistry
- Pack
- 120 ml
- Datasheet
- Published
- Method
- Jaffe, two-step end point
- Sample
- Serum: fresh, clear, no hemolysis; heparin plasma may be used; urine diluted 1:15 or 1:100
- Sample volume
- 200 µl (0.20 ml)
- Reagent volume
- 2.5 ml of working reagent, then 0.10 ml of acid reagent
- Wavelength
- 510 nm (500 to 530 nm, or a green filter)
- Flowcell temperature
- 30 °C or 37 °C
- Incubation
- 15 minutes at 37 °C, then 5 minutes at 37 °C after the acid reagent
- Standard
- 2 mg/dl, supplied separately
- Reagents
- Picrate, alkali and acid reagents; the working reagent is equal volumes of 1 and 2
- Automated analyzers
- The datasheet recommends ENZOPAK Creatinine instead
- Caution
- Avoid contact with skin, eyes and clothes; use automated pipettes
- Storage
- Reagents at room temperature; standard at 2 to 8 °C
- Stock codes
- CC3-CRE.08M
- Made in
- Vadodara, Gujarat, India
Performance1 figure
- Linearity
- Up to 12 mg/dl; dilute higher samples with 0.9% saline
Procedure at a glance5 steps
- Mix equal volumes of 1 Creatinine and 2 Creatinine as the day's working reagent.
- Add 0.2 ml of sample, or of standard, to 2.5 ml of working reagent and incubate for 15 minutes at 37 °C.
- Read the standard (STD1) and test (TS1) at 510 nm against distilled water.
- Add 0.1 ml of 3 Creatinine (acid reagent), mix, and keep for 5 minutes at 37 °C, or 10 minutes at room temperature; read again (STD2, TS2).
- Creatinine (mg/dl) = (TS1 − TS2) ÷ (STD1 − STD2) × 2.
Every stock code.
Creatinine (End Point) ships in one pack size.
| Stock code | Pack | Photograph | Datasheet |
|---|---|---|---|
| CC3-CRE.08M | 120 ml | — | Datasheet |
More clinical chemistry.
All 51 in clinical chemistry →
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle