Drawing, not a photograph. This pack has not been photographed yet; the stock codes and pack sizes below are the specification.
Supplied as 50 ml.
Stock code IM-MIT.084
- Supplied by Reckon Diagnostics, Vadodara
- Datasheet published: see every stock code below
Product details.
Intended use: Microalbumin Turbilatex is a quantitative latex turbidimetric test for microalbumin in human urine. Latex particles coated with anti-human albumin antibodies agglutinate with the albumin in the sample, and the change in absorbance is compared with a calibrator of known concentration. Supplied by Reckon Diagnostics, Vadodara.
The specifications and steps on this page are from the datasheet, last updated 04-2023. The datasheet governs: read it before use, or ask us.
- Method
- Latex turbidimetry
- Sample
- Fresh urine
- Sample volume
- 7 µl
- Wavelength
- 540 nm (530 to 550 nm)
- Linearity
- Up to 150 mg/L
- Sensitivity
- Δ 3.8 mA per mg/L
Full specification16 items
- Category
- Immunoturbidimetric
- Pack
- 50 ml
- Datasheet
- Published
- Method
- Latex turbidimetry, two point (fixed time)
- Sample
- Fresh urine: adjusted to pH 7.0 and centrifuged; stable 7 days at 2 to 8 °C
- Sample volume
- 7 µl
- Reagent volume
- 1 ml of working reagent (0.9 ml of R1 + 0.1 ml of R2)
- Wavelength
- 540 nm (530 to 550 nm)
- Temperature
- 37 °C
- Readings
- Immediately, and again after 2 minutes
- Calibration
- Calibrator 50 mg/L, included, ready to use
- Working reagent
- 1 day at 2 to 8 °C
- Caution
- Human-origin components tested negative for HBsAg, HCV and HIV; handle as potentially infectious
- Storage
- 2 to 8 °C; do not freeze the calibrator
- Stock codes
- IM-MIT.084
- Supplied by
- Reckon Diagnostics, Vadodara
Performance4 figures
- Linearity
- Up to 150 mg/L; dilute higher samples 1/5 in 9 g/L NaCl
- Detection limit
- 2 mg/L
- Sensitivity
- Δ 3.8 mA per mg/L
- Interference
- None from glucose below 2 g/L, hemoglobin below 10 g/L, creatinine below 3 g/L; urea at 1 g/L or more and bilirubin at 10 mg/dl or more interfere
Procedure at a glance4 steps
- Mix 0.9 ml of diluent (R1) with 0.1 ml of latex (R2) as the working reagent.
- Add 7 µl of calibrator or sample to 1.0 ml of working reagent and mix.
- Read the absorbance at 540 nm immediately (A1) and again after 2 minutes (A2).
- Microalbumin (mg/L) = (A2 − A1) of sample ÷ (A2 − A1) of calibrator × calibrator concentration.
Every stock code.
Microalbumin Turbilatex ships in one pack size.
| Stock code | Pack | Photograph | Datasheet |
|---|---|---|---|
| IM-MIT.084 | 1 x 50 ml | – | Datasheet PDF, IM-MIT.084 |
Questions and answers.
Microalbumin Turbilatex: what sample does it need?
The datasheet gives the sample as Fresh urine: adjusted to pH 7.0 and centrifuged; stable 7 days at 2 to 8 °C. The sample volume is 7 µl.
Microalbumin Turbilatex: what method does it use?
The method on the datasheet is Latex turbidimetry, two point (fixed time).
Microalbumin Turbilatex: what wavelength is it read at?
According to the datasheet, it is read at 540 nm (530 to 550 nm).
Microalbumin Turbilatex: what is the linear range?
The datasheet gives the linear range as Up to 150 mg/L; dilute higher samples 1/5 in 9 g/L NaCl.
Microalbumin Turbilatex: how should it be stored?
The datasheet gives storage as 2 to 8 °C; do not freeze the calibrator.
Microalbumin Turbilatex: what pack sizes are available?
It comes in one pack size: 1 x 50 ml (IM-MIT.084).
More immunoturbidimetric.
All 7 immunoturbidimetric reagents →
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle
Reagent bottle