Name: Leptospira Card
Brand: Reckon Diagnostics
SKU: RDT-LPT.110

Cassette: no photograph of this pack is published yet

Drawing, not a photograph. This pack has not been photographed yet; the stock codes and pack sizes below are the specification.

CARD format. supplied as 10 tests.

Pack size

10 TestRDT-LPT.110

Stock code RDT-LPT.110

ASK ABOUT THIS PRODUCT →

Made and batch-released in Vadodara
ISO 13485:2016 quality system
Datasheet published: see every stock code below

Product details.

The Leptospira Card (IgG/IgM) is a chromatographic immunoassay for the rapid, differential detection of IgG and IgM antibodies to Leptospira interrogans in human whole blood, serum or plasma. It gives a preliminary result: MAT, ELISA or PHA is needed to confirm infection. Manufactured at Reckon’s Vadodara facility under ISO 13485:2016 quality management, and released against reference standards before dispatch.

The specifications and steps on this page are from the datasheet, last updated 04-2023. The datasheet governs: read it before use, or ask us.

Method: Chromatographic immunoassay
Sample: Whole blood
Sample volume: 1 drop (about 25 to 30 µl)
Read at: Within 15 minutes
Storage: 2 to 40 °C
Format: Card

Full specification14 items

Category: Rapid diagnostics
Format: CARD
Pack: 10 tests
Datasheet: Published
Method: Chromatographic immunoassay, colloidal gold
Detects: IgG (line G) and IgM (line M) antibodies to Leptospira interrogans
Sample: Whole blood (finger prick, or EDTA, heparin or oxalate tube), serum or plasma; up to 24 hours at 2 to 8 °C, or frozen at −20 °C
Sample volume: 1 drop (about 25 to 30 µl)
Buffer: 2 drops (about 75 to 80 µl)
Read at: Within 15 minutes; positives can show from 1 minute
Limitation: A preliminary result: confirm with MAT, ELISA or PHA
Storage: 2 to 40 °C in the sealed pouch; do not freeze
Stock codes: RDT-LPT.110
Made in: Vadodara, Gujarat, India

Procedure at a glance5 steps

Bring the specimen and test components to room temperature.
Open the pouch at the notch and lay the device on a clean, flat surface.
Add 1 drop (about 25 to 30 µl) of whole blood, serum or plasma to the sample well without air bubbles, then 2 drops (about 75 to 80 µl) of buffer.
Read within 15 minutes, not later.
C only is negative; C and M is IgM positive (acute infection); C and G is IgG positive (secondary or past infection); C, G and M is positive for both; no C line means the test is invalid.